|
SRW VOC Retaining Wall & Paver Adhesive is the highest performing
adhesive of its kind. Meets State and Federal VOC regulations. It
is
formulated especially for masonry, concrete, brick, block, pavers
and
common landscaping materials. It can be used for bonding frozen,
damp surfaces. It exceeds requirements for APA Specification AFG-01,
ASTM D3498 and ASTM C557.
• Interior/Exterior
• Ideal for brick, pavers, masonry and concrete
• Professional strength adhesive
• Use on wet or frozen surfaces
• Provides a strong, durable bond
COVERAGE:
10.5 oz cartridge = 1/4" bead, 32 ft; 3/8" bead, 14 ft
|
|
• FAST SETTING TIME: 3 HOURS
• SETS AT ABOVE FREEZING TEMPERATURE (32°F)
• WILL NOT STAIN PAVERS
HELPS PREVENT
• WEED GROWTH
• ANT HILLS
• EROSION & WEARING AWAY
IDEAL FOR
• SLOPING AREAS
• AROUND POOLS
• ALL TYPE OF DRIVEWAYS & SIDEWALKS
Polymer Sand is a unique mixture
of polymer binders and a calibrate
sand available in beige or slate grey. The installation of Polymer
Sand is
almost identical to using regular paver joint sand, except for the
application of water. Once Polymer Sand sets, it
becomes very firm and
locks between the paver joints. This firm bond maintains pavers
securely in place, being equally effective on both horizontal and
sloped
surface.
|
 |
For Natural Stone Applications
IDEAL FOR
• NATURAL STONE PATIOS
• NATURAL STONE WALKWAYS
• PATHWAYS
• YOU DON'T HAVE TO BE AN EXPERT TO GET PROFESSIONAL RESULTS
• SWEEP IT IN THE JOINTS, SPRAY A MIST OF WATER AND YOU'RE DONE
FOR JOINTS .5" TO 4"
ADVANTAGES OVER CEMENT JOINTS:
• SWEEP POLYMERIC DUST IN JOINTS (NO TROWELLING)
• NATURAL STONE FINISH ON SURFACE (UNLIKE WHITE CEMENT JOINT)
Polymeric Stone Dust is recommended
for a variety of uses, including
pool sides, patios, foot paths, etc… Natural stones have to
be installed
on drainage bed systems: maximum of 1" (2.5 cm) of sand or stone
dust,
plus a minimum of 5" (12.5 cm) of crushed stone.
|
